OEM Factory for China Sand Casting Stainless Steel/Carbon Steel Water Pump Parts

Applications:

• HVAC and Cooling Tower
• Raw Water Supply
• Drinking water supply
• Industrial Applications
• Irrigation
• Marine and ship buildings
• Cold Water Circulation
• Pool Water
• Condense Systems
• Fire Fighting Systems

 

SPECIFICATIONS:

Speed: 2900rpm/ 1480rpm/1750rpm/3500rpm
Capacity:3m3/h—5,000m3/h
Head:4.5m—101m
Size:DN50—DN500
Max Speed:3500rpm (Diameter of impeller will be reduced )
Working Condition: Generally it is 1.6Mpa, It can rise to 2.4Mpa if material is Nodular cast or Cast Steel .


Product Detail

Product Tags

It truly is our accountability to meet your needs and proficiently provide you. Your pleasure is our best reward. We are on the lookout ahead to the stop by for joint development for OEM Factory for China Sand Casting Stainless Steel/Carbon Steel Water Pump Parts, Should you be fascinated in any of our products and services, remember to do not hesitate to make contact with us. We're ready to reply you inside of 24 several hours soon after receipt of one's ask for and also to develop mutual un-limited advantages and organization in around potential.
It truly is our accountability to meet your needs and proficiently provide you. Your pleasure is our best reward. We are on the lookout ahead to the stop by for joint development for China Lost Wax Casting, OEM Castings Pump Parts, We set a strict quality control system. We've got return and exchange policy, and you can exchange within 7 days after receive the wigs if it is in new station and we service repairing free for our solutions. Be sure to feel free to contact us for further information if you have any questions. We are glad to work for every client.

Temperature of water≤80℃, suction pressure≤1kg/cm2, working pressure is 1.6Mpa.
Temperature of water≤100℃, suction pressure≥2kg/cm2, working pressure is 1.6Mpa.
Temperature of water≤120℃, suction pressure≥4kg/cm2, working pressure is 1.6Mpa.

Application Std: Flange std can be BS,DIN,ISO,etc

INNOVATION:
•There are four wheels installed on the base plate to make sure the pump can be repaired quick and easily.
•If capacity is bigger than 400m3/h, the double volute is used to balance the radial force and increase the service time of the bearing(at least 2 times)
•The direction of suction/discharge can be on the top at the same time.
•The pump can be used to mixed cool and hot water, so Heat exchange plate is not necessary to use.

Remarks: We have been OEM for many brands from Europe and our pumps has been used by famous brands from T BAZ series is innovated monoblock pump used in HVAC area.

 

 

Constructure

baz-1

1 Base plate 2 Sliding wheels 3  Pin shaft 4 Support 5 Screw 6 Safty screw 7 Two end screws
8 Screw 9 Two end screws 10 Screw nut 11 Eletric motor 12 Water slinger 13 Mechanical  seal 14 Bolts
15  Pump cover 16 Impeller 17 Pump casing 18 Key 19  Impeller nut 20 Nuts 21 Bolts

baz-2

1. Bolt 2. Cornical plug 3. Two end screws 4. Nut 5 impeller nut 6. Key 7. Pump casing
8. Impeller  9. Corrosion proof cover 10. Front static o-ring seat 11. Bolt 12. Connection pipe 13. Mechanical seal . 14. Casing cover
15. Rear o-ring seat 16. Bolt 17. Two end bolts. 18. Nut 19. Water slinger 20. Electric motor 21 bolt
22. Screw 23. Two end screw 24 safty plug 25. Support 26. Plug shaft 27. Wheels 28. Base plate.

baz-4

1 PUMP CASING 2 DISCHAEGE RUBBER PIPE 3 CONNECTED PIPE 4 CASING COVER
5 THREE WAYS CONNECTION 6 INLET RUBBER PIPE 7 CONNECTOR 8 BALL VALVE

  • Previous:
  • Next:

  • Related Products