Our LF Series fish pump is fully adapted to fishing boats for easy and quality transfer of herring, sardines, anchovies, mackerel schools and even small pelagics, up to 1.5kg.

The LF Series’s housing and frame are made of 316L stainless steel and are therefore perfectly compatible with seawater.

This range of stainless steel pumps is lightweight, easy to handle, operate and move from one location to another, and has a high flow rate.

Product Detail

Product Tags

High Performances

Optimised by powerful digital simulation tools, the LF Series performance matches its exceptional design.
Available in 11kw power, it can transfert your fishes on 1000 meters lenght.
Its 15 m of TDH (total dynamic head) as 4m max. suction height & 11m discharge enable the pump to adap to a lot of situations.

Ultra-fast Priming

We designed this pump to be easy, fast and efficient to start.
That’s why we equipped the Pescamotion 40 with a real liquid ring vacuum pump to fill the hose and the pump housing very quickly.
This stainless steel priming pump is very resistant.

Electrical Box

The control box is easily accessible on the side of the pump.
It is very easy to use, but enables you to take full control of the pump. Only 2 buttons: on-off and a potentiometer are enough to operate the LF Series .


Designed to be easily handled by hand or by machines, the LF Series can be :
– Pulled or pushed by hand thanks to the drawbar and its 2 handles.
– Towed by a tractor with the integrated loop at the draw bar extremity.
– Lifted or handled safely by a forklift truck thanks to its two fork positions.
– Lifted and handled with a crane thanks to its 4 lifting rings.

Perfectly Suited For Boat Installation

Easy to handle, operate and move, constructed entirely of 316L stainless steel, it pump is ideally suited for installation on seiner vessels.

life fish pumps (2)
life fish pumps (3)


The pump is supplied as standard with a suction cone.

Semi-transparent, flexible hoses are available as an option in 5 or 10 m lengths:

Ø 6″ (Ø 150 mm) hoses with male and female camlock assembled at each hose extremity.
Ref. : PP0603FM length. 5 m
Ref. : PP0604FM length. 10 m

Ø 8″ (Ø 200 mm) hoses with male and female camlock assembled at each hose extremity.
Ref. : PP0803FM length. 5 m
Ref. : PP0804FM length. 10 m


A 6″ reduction on the pump inlet and outlet helps you adapt to any working situation.
Ref. : PH061111


The dewatering hopper is an important element for the correct functioning of a fish pump.
In order to be efficient, the dewatering hopper requires a particularly well-thought-out design.
For this purpose, we have used numerical simulation.

The “Dewat 40” is suitable for the Pescamotion 40 or Pescavac 50 pump and the Helios 40 or 50 grader.
Ref. : TD0801


As an option, a compact, waterproof remote control is available.
With a working distance of 200 m outdoors, it permits a complete control of the pump.
Ref : PH00REM2

  • Previous:
  • Next:

  • Related Products